Publications

 

J. Ghaisari

ECE

 
Home
Research Interests
Educations
Honors and Awards
Publications
Industrial Projects
Courses
Professional Experiences
Graduate Students
Photo Gallery

 

The last updated:

May 21, 2013

 

  •  Journal Papers:

  • [11]    A.Hemat, M. Binandeh, J. Ghaisari, and A. Khorsandi, “Development and field testing of an integrated sensor for on-the-go measurement of soil mechanical resistance,” ELSEVIER - Sensors & Actuators: A. Physical, Vol. 198, Issue 4, pp. 61-68, 2013.  (Abstract)

    [10]    F. Kazempour, and J. Ghaisari, “Stability Analysis of Model-Based Networked Distributed Control Systems,” ELSEVIER - Journal of Process Control, Vol. 23, Issue 3, pp. 444-452, 2013.  (Abstract)

    [9]    S. Rahili,J. Ghaisari, and A.Golfar, “Intelligent Selection of Calibration Points Using a Modified-Progressive Polynomial Method,” IEEE Transactions on Instrumentation and Measurement, Vol. 61, No. 9, pp. 2519-2523, 2012. (Abstract)

    [8]    M. Hashemi,J. Ghaisari, and A.Salighehdar, “Identification and Compensation of a Capacitive Differential Pressure Sensor based on Support Vector Regression using Particle Swarm Optimization,” Intelligent Automation and Soft Computing, Vol. 18, No. 3, pp. 263-277,  2012.  (Abstract)

    [7]     J. Ghaisari, H.Jannesari, and M.Vatani, “Artificial Neural Network Predictors for Mechanical Properties of Cold Rolling Products,” ELSEVIER - Advances in Engineering Software, Vol. 45, Issue 1, pp. 91-99, Mar. 2012.  (Abstract)

    [6]       F. Kazempour and J. Ghaisari, “The Design of Networked Distributed Sliding Mode Controllers with Non-ideal Links, ELSEVIER - Journal of the Franklin Institute-Engineering and Applied Mathematics, Vol. 349, Issue 2, pp. 604-621, March 2012.  (Abstract)

    [5]        M. Soodavi, J. Ghaisari, and F. Sheikholeslam, “L2-gain Analysis for Switched Systems with a State-Dependent Switching Signal, IET Control Theory and Applications, Vol. 5, Issue 13, pp. 1523-1527, Sep. 2011.  (Abstract)

    [4]        J. Ghaisari and A. Ferdosi, A Direct Sequence Spread Spectrum Code Acquisition Circuit for Wireless Sensor Networks,International Journal of Electronics, Vol. 98, No. 6, pp. 793-800, Jun. 2011.  (Abstract)

    [3]        H. Khalilinia and J. Ghaisari, “Sub-Synchronous Resonance Damping in Total Variation Ranges of Operating Conditions Using a STATCOM,” International Review of Electrical Engineering, Vol. 4, No. 1, pp. 94-101, Feb. 2009.   (Abstract)

    [2]         B. Koushki, J. Ghaisari, and M. Saghaian Nejad, “Topology and Controller of a New Three-Phase Buck-Boost Inverter,”  International Review of Electrical Engineering, Vol. 4, No. 1, pp. 30-35, Feb. 2009  .(Abstract)

    [1]       J. Ghaisari and A. Bakhshai “An Advanced Robust MIMO SSSC Control Technique for Power Oscillation Damping Improvement,” Iranian Journal of Science and Technology, Transaction B, Vol. 30, No. B6, pp. 667-679, Dec. 2006.  (Abstract)

     

  •  Conference Papers:

  • [27]    A. Ferdosi, and J. Ghaisari, “Investigation of Wireless HART Sensor Network and its Applications in Vibration and Temperature Monitoring of Rotating Equipment,” 4th Conference on Rotating Equipments in Oil and Power Industries, Iran,  Jan. 22-23, 2013.

    [26]    N.N. Samani, J. Ghaisari, and M. Danesh, “Autonomous Parallel Parking of a Vehicle in a Limited Space Using a RBF Network and a Feedback Linearization Controller,” IEEE 2nd International eConference on Computer and Knowledge Engineering (ICCKE), 2012, pp. 117-122, Iran,  Oct. 18-19, 2012.

    [25]     R. Darahaki, and J. Ghaisari, “An Intelligent Control Method to Optimize Energy Consumption in Different Operation Conditions of Induction Motors,” 1st Conference on Energy Optimization in Steel Industries, Iran,  Jun. 10-11, 2012.

    [24]     M. Afshari, A. Tavasoli, and J. Ghaisari, “A PCA-based Kalman Estimation Approach for System with Colored Measurement Noise,” 20th  IEEE Iranian Conference on Electrical Engineering, ICEE 2012, pp. 969-973, Iran,  May 15-17, 2012.

    [23]     M. A. Bagherzadeh, J. Ghaisari, and S. Rahili, “A Linear Switching Control Approach for DC–DC Converters,” 19th  IEEE Iranian Conference on Electrical Engineering, ICEE 2011, Iran,  May 17-19, 2011.

    [22]     M. Moradi, J. Ghaisari, J. Askari, and M. Gorji, “A New Method for Detection of a Distributed Event in Wireless Sensor Networks,” 19th  IEEE Iranian Conference on Electrical Engineering, ICEE 2011, Iran,  May 17-19, 2011.

    [21]     M. Moradi, J. Ghaisari, J. Askari, and M. Gorji, “Modeling and Compensation for Capacitive Pressure Sensor by RBF Neural Networks,” IEEE International Conference on Control, Robotics and Cybernetics, ICCRC 2011, India,  March 19-21, 2011.

    [20]     M. Hashemi, J. Ghaisari, and Y. Zakeri, “Modeling and Compensation for Capacitive Pressure Sensor by RBF Neural Networks,” 8th  IEEE International Conference on Control & Automation, ICCA 2010, pp.1109-1114, China,  June 9-11, 2010.

    [19]       N. H. Tehrani, M. Heidari, Y. Zakeri, and J. Ghaisari, “Development, Depth Control and Stability Analysis of an Underwater Remotely Operated Vehicle (ROV),” 8th  IEEE International Conference on Control & Automation, ICCA 2010, pp.814-819, China,  June 9-11, 2010.

    [18]       H. Khalilinia, and J. Ghaisari, “Sub-Synchronous Resonance Damping in Series Compensated Transmission Lines Using a STATCOM in the Common Bus,”  IEEE Power and Energy Society General Meeting 2009, IEEE-PESGM 09, pp.1-7, Canada, 26-30 July, 2009.

    [17]      H. Khalilinia, and J. Ghaisari, “Improvement of Sub-Synchronous Resonance (SSR) Damping Using a STATCOM in the Transformer Bus,” IEEE-EUROCON 09, pp. 445-450, Russia, 18- 23 May, 2009.

    [16]      A.Salighehdar, and J.Ghaisari, “Neuro-Fuzzy Based Compensation Technique for Capacitive Pressure Sensor,” IEEE-EUROCON 09, pp. 1111-1116, Russia, 18- 23 May, 2009.

    [15]      B. Koushki, and J. Ghaisari, “A Voltage Reference Design for Three-Phase Boost Inverter,” IEEE-EUROCON 09, pp. 650-654, Russia, 18- 23 May, 2009.

    [14]      S.A. Etemad, and J. Ghaisari, “Estimating Shaft Crack Specifications Using Shaft Vibration Analysis and Neural Networks,” IEEE International Conference on Testing and Diagnosis 2009, ICTD 09, pp. 1-5, China, April 28-29, 2009.

    [13]      B. Koushki, H. Khalilinia, J. Ghaisari, and M. Saghaian Nejad, “A New Three-Phase Boost Inverter: Topology and Controller,” 21st IEEE Canadian Conference on Electrical and Computer Engineering, IEEE CCECE 08, pp. 757-760, Canada, May 4-7, 2008.

    [12]      M. Zamanian, J. Ghaisari, and F. Sheikholeslam, “Development of an INS Algorithm in Phi-Angle Approach for Large Attitude Errors,” 15th Saint Petersburg International Conference on Integrated Navigation Systems, Russia, May 26-28, 2008.

    [11]      J. Ghaisari, M. Habibi, and A. Bakhshai, “An MPPT Controller Design for Photovoltaic (PV) Systems Based on the Optimal Voltage Factor Tracking,” IEEE Electrical Power Conference 2007, EPC07, pp.359-362, Canada, 25-26 Oct. 2007.

    [10]      S.A. Khajehoddin, J. Ghaisari, A. Bakhshai, and P.K. Jain, “A Novel Modeling and Analysis for Clamped Multilevel Converters,” Power Electronics Specialists Conference 2006, PESC 06, vol. 1, pp. 629- 634, 18-22 June, 2006.

    [9]      J. Ghaisari, A. Bakhshai, and P.K. Jain, “A nonlinear control approach to increase power oscillations damping by means of the SSSC,” IEEE Power and Energy Society General Meeting 2005, IEEE-PESGM 05, Vol. 2, pp. 1601- 1608, 12-16 June, 2005.

    [8]   J. Ghaisari, A. Bakhshai, and P.K. Jain, “Power oscillations damping by means of the SSSC: a multivariable control approach,” IEEE Canadian Conference on Electrical and Computer Engineering, CCECE 05, vol. 1, pp. 2249- 2252, Canada, 1-4 May, 2005.

    [7]      J. Ghaisari, A. Bakhshai, and P.K. Jain, “Simultaneous Operation of a PSS and a Series Power Electronics-Based Controller with Minimum Interaction,” IEEE International Conference on Power Electronics and Drives Systems, PEDS05, vol. 1, pp. 286-291, 28-01 November, 2005.

    [6]      J. Ghaisari, and A. Bakhshai, “Exact harmonics elimination in PWM multi-module converters,” IEEE Applied Power Electronics Conference and Exposition, APEC05, Twentieth Annual IEEE, vol. 3, pp. 1845-1850, 6-10 March, 2005.

    [5]      J. Ghaisari, and A. Bakhshai, “Power oscillation damping improvement by means of a feedback linearized solid state series controller,” IEEE Conference on Control Applications, CCA05, vol. 1, pp. 629- 634, 28-31 August, 2005.

    [4]      J. Ghaisari, and A. Bakhshai, “Parameterize pre-compensator design for static synchronous series compensator (SSSC),” IEEE Canadian Conference on Electrical and Computer Engineering, CCECE04, vol. 3, pp. 1617- 1620, 2-5 May, 2004.

    [3]      J. Ghaisari, and A.R. Bakhshai, “Multivariable controller design for Static Synchronous Series Compensator,” IASTED International Conference on Power and Energy Systems, 2003, EuroPES2003, vol. 1, pp. 329-334, June, 2003.

    [2]      J. Ghaisari, and A.R. Bakhshai, “Analysis and Simulation of Multi-pulse Converters,” Iranian Conference on Electrical Engineering, ICEE02, vol. 4, pp. 580- 589, May 2002.

    [1]      J. Ghaisari, and A. Ebrahimi, “Evaluation of optimal values of genetic algorithm parameters used for thermal unit commitment in power systems and their sensitivity analysis,” Iranian Conference on Electrical Engineering, ICEE02, vol. 4, pp. 550- 559, May 2002.

     

  •  Non-Referred Publications:

  • [2]      J. Ghaisari, “Instruction Manual for Digital Control Systems Laboratory,” 2nd Edition, Isfahan University of Technology, Isfahan, Iran, 2008.

    [1]      J. Ghaisari, and M. Zekri, “Instruction Manual for Linear Control Systems Laboratory,” Isfahan University of Technology, Isfahan, Iran, 2002.

     

 

Back | Home | Next